Satixfy SX3000
Satixfy SX3000
[root@iq-linux:factory:~] > [root@iq-linux:factory:~] > dmesg | grep command Kernel command line: console=ttyS0,115200n8 init=/bin/sh debug,earlyprintk=serial,ttyS0,115200n8,keep partition=factory maxcpus=4 finalcpus=4 isolcpus=1-3 [root@iq-linux:factory:~] > [root@iq-linux:factory:~] > dmesg | grep spi sx3000b-qspi 1d000000.qspi: registered master spi32766 (dynamic) spi spi32766.0: setup mode 0, 8 bits/w, 40000000 Hz max --> 0 sx3000b-qspi 1d000000.qspi: registered child spi32766.0 spi_master spi32766: mx66l1g45g (131072 Kbytes) [root@iq-linux:factory:~] > [root@iq-linux:factory:~] > cat /proc/meminfo MemTotal: 248048 kB MemFree: 81488 kB MemAvailable: 100192 kB Buffers: 0 kB Cached: 99472 kB SwapCached: 0 kB Active: 53264 kB Inactive: 17184 kB Active(anon): 46400 kB Inactive(anon): 176 kB Active(file): 6864 kB Inactive(file): 17008 kB Unevictable: 75120 kB Mlocked: 75120 kB SwapTotal: 0 kB SwapFree: 0 kB Dirty: 0 kB Writeback: 0 kB AnonPages: 46224 kB Mapped: 89344 kB Shmem: 75584 kB Slab: 13904 kB SReclaimable: 560 kB SUnreclaim: 13344 kB KernelStack: 1520 kB PageTables: 688 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 124016 kB Committed_AS: 445632 kB VmallocTotal: 1048144 kB VmallocUsed: 0 kB VmallocChunk: 0 kB [root@iq-linux:factory:~] > [root@iq-linux:factory:~] > cat /proc/cpuinfo system type : SX3000 machine : Satixfy SX3000 Development Board processor : 0 cpu model : MIPS interAptiv (multi) V2.0 BogoMIPS : 348.97 wait instruction : yes microsecond timers : yes tlb_entries : 64 extra interrupt vector : yes hardware watchpoint : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb] isa : mips1 mips2 mips32r1 mips32r2 ASEs implemented : mips16 dsp mt eva shadow register sets : 1 kscratch registers : 0 package : 0 core : 0 VCED exceptions : not available VCEI exceptions : not available VPE : 0 processor : 1 cpu model : MIPS interAptiv (multi) V2.0 BogoMIPS : 261.73 wait instruction : yes microsecond timers : yes tlb_entries : 64 extra interrupt vector : yes hardware watchpoint : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb] isa : mips1 mips2 mips32r1 mips32r2 ASEs implemented : mips16 dsp mt eva shadow register sets : 1 kscratch registers : 0 package : 0 core : 0 VCED exceptions : not available VCEI exceptions : not available VPE : 1 processor : 2 cpu model : MIPS interAptiv (multi) V2.0 BogoMIPS : 348.97 wait instruction : yes microsecond timers : yes tlb_entries : 64 extra interrupt vector : yes hardware watchpoint : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb] isa : mips1 mips2 mips32r1 mips32r2 ASEs implemented : mips16 dsp mt eva shadow register sets : 1 kscratch registers : 0 package : 0 core : 1 VCED exceptions : not available VCEI exceptions : not available VPE : 0 processor : 3 cpu model : MIPS interAptiv (multi) V2.0 BogoMIPS : 348.97 wait instruction : yes microsecond timers : yes tlb_entries : 64 extra interrupt vector : yes hardware watchpoint : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb] isa : mips1 mips2 mips32r1 mips32r2 ASEs implemented : mips16 dsp mt eva shadow register sets : 1 kscratch registers : 0 package : 0 core : 1 VCED exceptions : not available VCEI exceptions : not available VPE : 1 [root@iq-linux:factory:~] > [root@iq-linux:factory:~] > free -k total used free shared buffers cached Mem: 248048 166320 81728 75584 0 99472 -/+ buffers/cache: 66848 181200 Swap: 0 0 0 [root@iq-linux:factory:~] > [root@iq-linux:factory:~] > df -h Filesystem Size Used Available Use% Mounted on devtmpfs 120.8M 0 120.8M 0% /dev tmpfs 121.1M 73.7M 47.5M 61% /tmp /dev/ubi0_0 98.7M 69.6M 29.1M 71% / /dev/ubi0_0 98.7M 69.6M 29.1M 71% /sysopt /dev/ubi0_0 98.7M 69.6M 29.1M 71% /common tmpfs 121.1M 0 121.1M 0% /dev/shm tmpfs 121.1M 192.0K 120.9M 0% /run /dev/ubi0_0 98.7M 69.6M 29.1M 71% /mnt [root@iq-linux:factory:~] > [root@iq-linux:factory:~] > ls -alh /sysopt/config/sat_router/ total 12 drwx------ 2 root root 312 Jan 1 00:00 . drwx------ 5 root root 360 Jan 1 00:04 .. -rw------- 1 root root 375 Jan 1 00:00 downstream_config.json -rw-r--r-- 1 root root 4.5K Jan 1 00:00 falcon.opt [root@iq-linux:factory:~] >
[root@iq-linux:factory:~] > df -h Filesystem Size Used Available Use% Mounted on devtmpfs 120.8M 0 120.8M 0% /dev tmpfs 121.1M 73.5M 47.7M 61% /tmp /dev/ubi0_0 98.7M 98.6M 76.0K 100% / /dev/ubi0_0 98.7M 98.6M 76.0K 100% /sysopt /dev/ubi0_0 98.7M 98.6M 76.0K 100% /common tmpfs 121.1M 0 121.1M 0% /dev/shm tmpfs 121.1M 192.0K 120.9M 0% /run /dev/ubi0_0 98.7M 98.6M 76.0K 100% /mnt [root@iq-linux:factory:~] > [root@iq-linux:factory:~] > cd /run/ [root@iq-linux:factory:/run] > [root@iq-linux:factory:/run] > mkdir temp [root@iq-linux:factory:/run] > [root@iq-linux:factory:/run] > cd temp/ [root@iq-linux:factory:/run/temp] > [root@iq-linux:factory:/run/temp] > sha256sum evo_iQseries_rmt_rootfs-21.0.4.0-9277.137.pkg 530436152d3b2469c5ffbcc4ff9f9845ffd3fcb8130415a18e5a0102c14d2c1d evo_iQseries_rmt_rootfs-21.0.4.0-9277.137.pkg [root@iq-linux:factory:/run/temp] > [root@iq-linux:factory:/run/temp] > package -mx -a ./evo_iQseries_rmt_rootfs-21.0.4.0-9277.137.pkg SavePackage: [A3A3] bootloader_upgrade.lua (1975)...Saved. SavePackage: [5669] boot-sectors.bin (131072)...Saved. SavePackage: [8666] common_10_128M (1262721)...Saved. SavePackage: [9739] kern (3228819)...Saved. SavePackage: [A276] package_base.tar.bz2 (12950338)...Saved. SavePackage: [DAFA] package_install.sh (13947)...Saved. SavePackage: [E89E] package.sig (6545)...Saved. SavePackage: [EF2D] package.signatures (6578)...Saved. SavePackage: [9A62] package_summary.xml (1458)...Saved. SavePackage: [C48F] soft_parts.sh (987)...Saved. SavePackage: [DE49] uboot_env.lua (330)...Saved. SavePackage: [98CB] uboot_upgrade.lua (1130)...Saved. SavePackage: [EE9A] utils.lua (3882)...Saved. SUCCESS saved package contents to ./ [root@iq-linux:factory:/run/temp] > [root@iq-linux:factory:/run/temp] > df -h Filesystem Size Used Available Use% Mounted on devtmpfs 120.8M 0 120.8M 0% /dev tmpfs 121.1M 73.5M 47.6M 61% /tmp /dev/ubi0_0 98.7M 98.6M 60.0K 100% / /dev/ubi0_0 98.7M 98.6M 60.0K 100% /sysopt /dev/ubi0_0 98.7M 98.6M 60.0K 100% /common tmpfs 121.1M 0 121.1M 0% /dev/shm tmpfs 121.1M 33.9M 87.2M 28% /run /dev/ubi0_0 98.7M 98.6M 60.0K 100% /mnt [root@iq-linux:factory:/run/temp] > [root@iq-linux:factory:/run/temp] > chmod +x package_install.sh [root@iq-linux:factory:/run/temp] > [root@iq-linux:factory:/run/temp] > ls -alh total 34544 drwxr-xr-x 2 root root 320 Jan 1 00:05 . drwxr-xr-x 6 root root 380 Jan 1 00:03 .. -rw------- 1 root root 128.0K Jan 1 00:05 boot-sectors.bin -rw------- 1 root root 1.9K Jan 1 00:05 bootloader_upgrade.lua -rw------- 1 root root 1.2M Jan 1 00:05 common_10_128M -rw------- 1 root root 16.8M Nov 4 2021 evo_iQseries_rmt_rootfs-21.0.4.0-9277.137.pkg -rw------- 1 root root 3.1M Jan 1 00:05 kern -rw------- 1 root root 6.4K Jan 1 00:05 package.sig -rw------- 1 root root 6.4K Jan 1 00:05 package.signatures -rw------- 1 root root 12.3M Jan 1 00:05 package_base.tar.bz2 -rwx------ 1 root root 13.6K Jan 1 00:05 package_install.sh -rw------- 1 root root 1.4K Jan 1 00:05 package_summary.xml -rwx------ 1 root root 987 Jan 1 00:05 soft_parts.sh -rw------- 1 root root 330 Jan 1 00:05 uboot_env.lua -rw------- 1 root root 1.1K Jan 1 00:05 uboot_upgrade.lua -rw------- 1 root root 3.8K Jan 1 00:05 utils.lua [root@iq-linux:factory:/run/temp] > [root@iq-linux:factory:/run/temp] > sh ./package_install.sh active0 mount: /dev/ubi0_0 is already mounted or /mnt busy /dev/ubi0_0 is already mounted on / /dev/ubi0_0 is already mounted on /sysopt /dev/ubi0_0 is already mounted on /common /dev/ubi0_0 is already mounted on /mnt package_install.sh active0: Found active0... package_install.sh active0: deleting. package_install.sh active0: Checking free space package_install.sh active0: Uncompressing archive. This may take a while. package_install.sh active0: Archive requires: 34128 kB package_install.sh active0: Remaining space on flash filesystem: 21128 kB package_install.sh active0: Archive contents too big for remaining space: 34128 > 21128 package_install.sh active0: Cleaning up... package_install.sh active0: Unmounting /mnt [root@iq-linux:factory:/run/temp] > [root@iq-linux:factory:/run/temp] > mount -t ubifs /dev/ubi0_0 /mnt/ [root@iq-linux:factory:/run/temp] > [root@iq-linux:factory:/run/temp] > ls -alh /mnt total 0 drwxr-xr-x 7 root root 800 Jan 1 00:03 . drwxr-xr-x 20 root root 1.4K Jan 1 00:00 .. drwxrwxr-x 20 500 500 1.4K Aug 6 2020 active0 drwx------ 21 root root 1.5K Mar 29 2019 active1 lrwxrwxrwx 1 root root 11 Jan 1 00:00 bin -> factory/bin drwxr-xr-x 3 root root 296 Jan 1 00:15 common lrwxrwxrwx 1 root root 11 Jan 1 00:00 dev -> factory/dev lrwxrwxrwx 1 root root 11 Jan 1 00:00 etc -> factory/etc drwxr-xr-x 20 root root 1.4K Jan 1 00:00 factory lrwxrwxrwx 1 root root 12 Jan 1 00:00 root -> factory/root drwx------ 4 root root 288 Jan 1 00:00 sysopt lrwxrwxrwx 1 root root 11 Jan 1 00:00 var -> factory/var [root@iq-linux:factory:/run/temp] > [root@iq-linux:factory:/run/temp] > umount /mnt [root@iq-linux:factory:/run/temp] > [root@iq-linux:factory:/run/temp] > cd ~ [root@iq-linux:factory:~] > [root@iq-linux:factory:~] > rm -rf /run/temp [root@iq-linux:factory:~] > [root@iq-linux:factory:~] > fw_printenv | grep fspart setboot=setenv bootargs console=ttyS0,115200n8 init=/bin/sh debug,earlyprintk=serial,ttyS0,115200n8,keep partition=$fspart maxcpus=$startcpus finalcpus=$finalcpus isolcpus=1-3 fspart=factory [root@iq-linux:factory:~] > [root@iq-linux:factory:~] > fw_setenv fspart active0 [root@iq-linux:factory:~] > [root@iq-linux:factory:~] > fw_printenv | grep fspart setboot=setenv bootargs console=ttyS0,115200n8 init=/bin/sh debug,earlyprintk=serial,ttyS0,115200n8,keep partition=$fspart maxcpus=$startcpus finalcpus=$finalcpus isolcpus=1-3 fspart=active0 [root@iq-linux:factory:~] > [root@iq-linux:factory:~] > reboot [root@iq-linux:factory:~] >
at factory system update to Evolution(active0) at active0 system update to Velocity(active1) active1 : Velocity active0 : Evolution factory : Evolution [root@iq-linux:active0:~] > [root@iq-linux:active0:~] > fw_setenv --help Usage: fw_setenv [OPTIONS]... [VARIABLE]... Modify variables in U-Boot environment -h, --help print this help. -c, --config configuration file, default:/etc/fw_env.config -s, --script batch mode to minimize writes Examples: fw_setenv foo bar set variable foo equal bar fw_setenv foo clear variable foo fw_setenv --script file run batch script Script Syntax: key [space] value lines starting with '#' are treated as comment A variable without value will be deleted. Any number of spaces are allowed between key and value. Space inside of the value is treated as part of the value itself. Script Example: netdev eth0 kernel_addr 400000 foo empty empty empty empty empty empty bar [root@iq-linux:active0:~] > [root@iq-linux:active0:~] > fw_setenv fspart active0 [root@iq-linux:active0:~] > [root@iq-linux:active0:~] > reboot [root@iq-linux:active0:~] > [root@iq-linux:active1:~] > [root@iq-linux:active1:~] > flashdbmgr --help --get--get summary -- display database information --get livepart -- display current partition --get nextpart -- display next partition for install --set --set switch -- switch database to next partition --set default -- switch database to default values --set update
============ End