Cisco MDS光交配置

一、配置流程

1. 创建VSAN，将端口加入VSAN

2. 创建ZONE，将端口加入ZONE

3. 创建zoneset,将ZONE加入zoneset，并启用zoneset

4. 启用所有端口

二、创建VSAN

#conf t

(config)#vsan database

(config-vsan-db)# vsan 10 name VSAN0010

(config-vsan-db)# vsan 10 interface fc 1/1 – 10

(config-vsan-db)# exit 

#show vsan 10 membership

三、创建ZONE

#config t

(config)#zone name ESXI-20-50 vsan 10

(config)#member interface fc1/5

(config)#member interface fc1/5

(config)#member pwwn 10:00:00:10:9b:d2:26:62

(config)#member pwwn 50:06:01:6a:49:e0:7b:0c

查看pwwn

(config)#show fcs database

(config)#show flogi database

(config)#zone commit vsan 10

四、配置ZONESET

#config t

(config)#zoneset name jxsxzonset vsan 10

(config-zoneset)#member ESXI-20-50

(config-zoneset)#zoneset activate name jxsxzonset vsan 10

(config)#zone commit vsan 10

五、删除vsan、zone、zoneset

删除zone

#config t

(config)#zoneset name jxsxzonset vsan 10

(config-zoneset)#no zone name ESXI-20-50 vsan 10

(config)#zoneset activate name jxsxzonset vsan 10

(config)#zoneset name jxsxzonset vsan 10

(config-zoneset)# no member ESXI-20-50

(config-zoneset)# zone commit vsan 10

(config)# sh run zone

删除vsan

#conf t

(config)#vsan database

(config-vsan-db)# vsan 1 name VSAN0001

(config-vsan-db)# vsan 1 interface fc 1/1 – 10

(config-vsan-db)# no vsan 10

Do you want to continue? (y/n) y
(config-vsan-db)# show vsan
vsan 1 information
name:VSAN0001 state:active
interoperability mode:default
loadbalancing:src-id/dst-id/oxid
operational state:down

(config-vsan-db)# exit